Antifreeze contains distilled water. If the content of antifreeze is lower than the minimum mark, and there is no emergency use of antifreeze, then you can add a small amount of water. This water should be mineral water or distilled water. Do not add ordinary tap water. Ordinary tap water has not been treated and contains a lot of impurities.
When water is added to the antifreeze, the concentration of the antifreeze will decrease, so that the freezing point of the antifreeze will become higher, and it will be easier to freeze. The impurities in ordinary tap water are more likely to produce scale, and the scale is prone to accumulation and blockage. If it is blocked, it will have a certain impact on the engine of the vehicle.
The addition of antifreeze needs to pay attention to some matters. It is necessary to control the amount of antifreeze. We will add it according to the water level line. If the antifreeze exceeds the maximum water level, it is prone to overflow. Antifreeze is corrosive and can easily corrode the rubber parts on the vehicle.
If you add too little antifreeze, the engine will freeze and crack in cold weather, and the cooling effect will be poor. If the engine is not well cooled, the engine has a relatively high probability of failure. Pay extra attention to the amount.
If mineral water is added to the antifreeze, we must control the force when stepping on the accelerator, and do not step on it too hard. If it is too heavy, the engine is prone to overheating. Adding water to antifreeze is only an emergency situation. Replace the antifreeze as soon as possible. If conditions permit, you can clean the pipeline, so that the water channel is not prone to blockage.
Email: