The automobile fuel injector is a very important component, it injects fuel into the engine cylinder to make it atomized and burned, and then it has power. However, fuel injectors have very high requirements for the cleanliness of fuel. If the fuel is of poor quality and contains impurities, the fuel injectors will be blocked, and the fuel injectors will be damaged even if used for a long time. Damaged fuel injectors will cause engine performance degradation and need to be replaced in time. How to remove the fuel injectors? The following is a detailed diagram of the disassembly of the fuel injector, let's take a look.
Disassembly diagram of fuel injector
1. First remove the engine guard.
2. Remove the intake pipe.
3. Unplug the power supply plugs of the 4 fuel injectors, press the clip on the interface, and you can unplug it. Be careful not to use brute force, and also unplug the throttle and idle motor at the same time.
4. The bracket of the fuel injector assembly is fixed with two screws. Unscrew the left and right screws of the fuel injector assembly.
5. The fuel injector can be taken out after disassembling the assembly.
The following is specificInjector disassembly video
Email: