• Welcome

Teach you to become a “crossing the river dragon” old driver, what should I do if the vehicle is deeply out of power?

Blog 2年前 (2022-01-19) 246 Views

Teach you to become a

I believe that many car owners will encounter the situation that the car is out of power, because after the car is parked for a long time, the power of the battery will be slowly lost. No fire situation.

Basically, car owners can solve this problem by themselves, but many car owners still don’t know how to operate Jianglong to start the car, or sometimes they can’t get on the car for other reasons after taking the power. When the power is turned off, I will show you what to do if the car is deeply dead.

Teach you to become a

First, let's talk about the situation of this car. Although the battery has just been replaced for half a year, it has been parked for more than two months. Another car came with an electric start.

Since the battery is exhausted, turning the key on the whole car is completely unresponsive, so start the electricity. For the sake of safety, it is recommended to follow the following steps:

Teach you to become a

Teach you to become a

1. Find the location of the battery without tram and tram, and then find the positive and negative electrodes. Generally, the red cover marked with "+" is the positive electrode, and the other side is the negative electrode.

Teach you to become a

2. Connect the electricity in order, first connect the positive pole of the tram without electric car, then connect the positive pole of the electric car, and then connect the negative pole of the electric car without electric car. When a spark bursts out when connecting to the negative pole of the electric car, it means that the connection is correct. Always remember that the positive pole is connected to the positive pole, the negative pole is connected to the negative pole, and the positive pole is connected first, then the negative pole.

Teach you to become a

3. After the wires are connected, the dashboard lights of the tram without the tram are already on, indicating that the power has been successfully connected. At this time, you can try to start the tram without the tram. If it fails to start, you can step on the accelerator for the tram to speed up the charging speed. , generally 5-10 minutes.

Teach you to become a

4. Normally, after charging for a period of time, the vehicle can start normally, and then you can first pull out the negative pole of the electric car, then pull out the positive pole of the electric car, and then let the electric car set on fire for a period of time. This is the most basic the connection process.

here comes the point, our situation that day did not start successfully for the first time, the car has been charged for nearly 20 minutes,Da da da"There is no power-on sound, which means that there is not much electricity charged at all.

Two reasons were suspected at the time,First, the car battery is broken, and second, the car is out of gas. Here are two more knowledge points,If there is only a sound of "da da da", it means that the power is still not enough to drive the starter. If there is a sound of the engine running but it still does not start, the starter of the car is broken or out of fuel., so it was directly judged that the power was still insufficient at that time.

Teach you to become a

It just so happened that a car owner in the parking lot came over at that time. After seeing the situation, I suspected that there was a problem with the cable, so I took his GL8 and cable to try it out. , and later tried our car with his line, and it can be hit as well.

Teach you to become a

After a comparison, the copper wire in our line is relatively thin, and the conductive current is not strong, not to mention that the car is completely dead, so it cannot be carried.

Finally, let's summarize some precautions for taking electricity when the car is deeply out of power:

1. The positive pole of the two cars is connected to the positive pole, and the negative pole is connected to the negative pole.

2. Connect the positive pole at the beginning, and pull out the negative pole after the end.

3. Listen to the sound when it cannot be started. If there is only "da da da", it means that the battery is insufficient. If there is still a sound of the engine turning, it may be other problems.

4. If it still cannot be started after being powered on for a long time, check whether the battery power of the two cars is the same, and you can choose to change to a wire with better conductivity.