【Car owner's car knowledge]Autumn is an important period of recuperation for vehicles. It not only repairs the damage caused by the use in summer, but also prepares for the harsh operating environment of the coming cold winter.
13 must-do car care guides for fall:
1. Body paint maintenance:If there are obvious scratches on the body, the exterior painting treatment should be done in time. The role of paint is not only beautiful, it is more important to have anti-rust function. Summer is a rainy season, the rainwater contains rain acid, and the strong sunlight in summer will cause corrosion and oxidation of the paint surface. Be sure to choose cleaning, polishing to waxing, sealing glaze or coating according to the actual situation of the body.
2. Car tire maintenance:In summer, due to the high temperature, the tires are generally not inflated too much. In autumn, it is different. Due to the relatively low temperature, the tires need to be supplemented with air pressure to the specified range. At the same time, the tires should also be checked for obvious trauma, scratches, etc. In autumn and winter, the rubber becomes hard and relatively brittle, which not only reduces the friction coefficient, but also is more prone to air leakage and tire puncture.
3. Engine compartment inspection:Including oil, steering oil, brake fluid and antifreeze detection.
4. Brake system inspection:Pay attention to whether the amount of brake fluid is sufficient, whether the quality is deteriorated, and it should be refilled or replaced in time when necessary. position, and if necessary, clean up the piping part of the entire brake system.
5. Ignition system detection:The maintenance of the ignition system is related to whether the vehicle can be started, so the plug part should be carefully checked to see if it is rusted. Once rusted, it should be treated with professional cleaning agent.
6. Maintenance of charging system:It is important to check whether the generator belt is aging or cracked in the rainy season or high temperature weather. If none of the above happens, also remember to look at the tightness of the belt. If the belt is too loose, it will cause the clamor of the belt, which will cause the belt to wear early; if the belt is too tight, it will cause eccentric wear of the generator bearing.
Email: