Which key is used to spray water on the wipers?

First, we need to understandwiperslocation and function of the device. Generally, the wiper operation button is located on the right side of the steering wheel, but a few models also place it on the left side. If you find a button on the outermost side of the control stalk on the right side of the steering wheel, congratulations, this is the switch for the wiper spray.

Just press the button to activate the water spray function and make the wipers start working. However, if your vehicle doesn’t have the relevant button, don’t worry, there’s another way to do it. You can flip the stalk toward you for two or three seconds and the wipers will start sweeping and spraying water.

After understanding the operation method, we need to pay attention to some details.when youDiscoverWhen the wipers don't spray water, don't rush to complain about vehicle problems. It's probably justglass of waterUsed up. Therefore, it is very important to regularly check the glass water storage level in the car. In addition, in order to protect the wipers and glass, the correct use of wipers must also be remembered.

Here are some tips:

First of all, before using the wipers on a sunny day, it is best to spray the glass with water instead of dry wiping. This keeps the glass clean while avoiding damage to the wipers.

Secondly, if there are foreign objects such as soil clods on the glass, be sure to remove them manually in time. This prevents foreign objects from wearing down the wiper strips when using them, thereby extending the service life of the wipers.

In addition, before using the wiper to clear the floating snow on the glass in winter, be sure to manually clear the ice ballast first. Never wipe hard with the wiper to avoid damaging the wiper.

Finally, the front windshield may be equipped with a wiper sensor that can sense the size of rain and automatically adjust the frequency of wipers. Therefore, it is important to keep the glass clean.