[Car Owner’s Home Maintenance Knowledge]Hello!Dear friends of Car Owners Home, our"Little Fatty Learns to Drive"I meet you all again. The response to the first two issues was good. Recently, a friend of Xiaopangjun encountered a problem because he had a flat tire while driving. As a result, he did not know the specific steps to change the tire, so he had to call a tow truck. So Xiaopang continued to be Lei Feng, teaching the novices how to change tires step by step.
1. What should I do before changing a tire?
①Safe parking
After discovering a tire blowout or air leakage on your vehicle, do not panic or stop in the middle of the road. Turn on the double flashers immediately and move the vehicle to the side of the road or the emergency lane. Try to choose a flat road surface and avoid turning or slopes. Stop the vehicle, wait until the vehicle is parked, turn off the engine and apply the handbrake.
Note:Be sure not to drive to the repair shop to change the tire, because as the air leakage accelerates, continuing to drive may cause the entire tire to be scrapped!
②Place a warning triangle
When safety is confirmed, the warning triangle should be placed immediately.
The position of the triangle sign should be placed 50-150 meters behind the vehicle, and if it is a highway, it should be plac
[Car Owner’s Home Maintenance Knowledge]Hello!Dear friends of Car Owners Home, our"Little Fatty Learns to Drive"I meet you all again. The response to the first two issues was good. Recently, a friend of Xiaopangjun encountered a problem because he had a flat tire while driving. As a result, he did not know the specific steps to change the tire, so he had to call a tow truck. So Xiaopang continued to be Lei Feng, teaching the novices how to change tires step by step.
1. What should I do before changing a tire?
①Safe parking
After discovering a tire blowout or air leakage on your vehicle, do not panic or stop in the middle of the road. Turn on the double flashers immediately and move the vehicle to the side of the road or the emergency lane. Try to choose a flat road surface and avoid turning or slopes. Stop the vehicle, wait until the vehicle is parked, turn off the engine and apply the handbrake.
Note:Be sure not to drive to the repair shop to change the tire, because as the air leakage accelerates, continuing to drive may cause the entire tire to be scrapped!
②Place a warning triangle
When safety is confirmed, the warning triangle should be placed immediately.
The position of the triangle sign should be placed 50-150 meters behind the vehicle, and if it is a highway, it should be placed 150 meters behind the vehicle; in rainy and foggy weather or at night with low visibility, warning signs need to be set up 100 meters behind the car.
③Inspection tools
After completing the above steps, the next step is to check whether the jack, tool kit and spare tire carried with the vehicle are complete and can be used normally. At the same time, you also need to confirm again that the vehicle has been stopped and turned off, the gear has been shifted to P (neutral for manual models), and the handbrake has been tightened to ensure that the vehicle will not cause an accident during the tire change process.
Note: Don’t think that the spare tire must be in good condition. It’s best to check it when you travel far, otherwise you will just cry if something goes wrong.
Several commonly used tools for tire replacement are jacks, screw rocker arms, power-assisted rocker arms, etc.
2. Tire changing process
①Remove the tire
When removing the tire, do not immediately jack up the car. You must first use the screw rocker to loosen the screws on the wheel one by one. When loosening these bolts, use the diagonal method of loosening one by one. This is In order to prevent the fasteners from being deformed due to uneven stress.
Note:When removing the wheel screws, pay attention to the direction of force: counterclockwise to loosen; clockwise to tighten.
Generally speaking, this process is very painful (strong men automatically ignore it), because the screws that fix the wheel are tightened very tightly, so we can use our whole body strength (so you see that repair shops use power tools to move the bolts up and down) , let me go, the tools that come with this are too stupid.
Remember that the screw rocker arm must be aligned and stuck in the position of the screw, otherwise it will easily slip and damage the tool if you apply force all over the body. Some models are also equipped with anti-theft bolts. At this time, the special anti-theft bolt sleeves provided by the original vehicle must be put on so that they can be caught by the wrench. The bolts only need to be loosened a little, and do not unscrew all the bolts.
②Use of jack
After all the bolts are loosened, the vehicle can be raised (note: just loosen them before raising the vehicle). Before raising the vehicle, you must first find the right position for jack support. Since the frame support points of each car are different, most car manufacturers usually mark the corresponding body positions to make it easier for everyone to find. If If you can't find it, you have to climb down and touch it. (The search criterion is: find the most rigid body connection component)
Pay attention when using the jack: Generally speaking, there are slots corresponding to the jack on both sides of the car bottom. Be careful to place the jack in the slot to avoid accidents.
Do not use the jack to raise the car body too fast to avoid the danger of the vehicle slipping off the jack due to unstable support. Prop the car body until the tire is off the ground, leaving about a finger's worth of space where you can loosen and remove all the bolts. Don't raise it too high at any time to avoid trouble when installing the tire later.
③Install spare tire
The most difficult part of installing the spare tire is to align the spare tire with the wheel fixing bolt holes. It is best to have another person help. If you are doing it alone, it is recommended to use your legs or feet to hold the spare tire to prevent displacement, and then tighten the bolts slightly diagonally. Tighten.
Note that when equipping a tire, do not tighten one screw in one go. Instead, tighten it in turn in diagonal order. When tightening the screws, it is best to keep the same number of turns for each screw to ensure that the screws are evenly stressed. .
The rules for tightening the screws are exactly the opposite of removing them, just pre-tighten them before loosening the jack. After loosening the jack, tighten it vigorously.
Finally, don’t forget that if the vehicle’s spare tire is not a full-size spare tire, but only a temporary spare tire, you should find the nearest repair point or tire shop as soon as possible to replace the regular tire. The maximum speed cannot exceed 80km/h, and the driving distance cannot exceed 150 kilometers. , Non-full-size spare tires are prone to slipping. Do not accelerate, brake or turn sharply. Drive as slowly as possible. Safety first is the most important thing.
After a lot of tossing, the palm of my hand turned into a black lake. So remember to pack a pair of gloves in the trunk.
Summarize:Changing a spare tire can be regarded as a physical job, and the amount of exercise is not small. Changing a tire also requires certain skills. You may encounter it only once in a long time, but don't be afraid of ten thousand, just be afraid of the unexpected. In an emergency, you will not be in a hurry. As a novice, you should practice the process of changing tires. "Do it yourself and have enough food and clothing." Friends, we will see you in the next issue.
Related recommended reading:Little Fatty Learns to Drive Lesson 1: How to adjust the driving posture? http://news.16888.com/a/2014/0828/525811.htmlLittle Fatty Learns to Drive Lesson 2: Detailed explanation of how to play a car steering wheel http://news.16888.com/a/2014/0924/538686.html
