Sourced from Italian technology, the 560-horsepower Hongyan Jieshi C500 Northern Edition is seen on the street.

The so-called Hongyan Jieshi C500 is not 500 horsepower, but is equipped with an IVECO Corso 13 engine with an engine power of 560 horsepower. It is a fifth-generation product with five major upgrades and National V emission standards. The cockpit adopts integral stamping technology, with 80% double-sided galvanized sheets welded with high precision, and the thickest part is up to 1.5 centimeters. The cockpit is mostly made of soft materials to ensure the safety of the people in the cockpit in extreme accident situations. The cruise control paddle is integrated on the right side of the steering wheel instead of on the steering wheel. The speaker is placed in the lever position, which is still a bit strange. It is equipped with an Iveco Corso 11L/13L engine with an in-cylinder braking system and a Fast direct-block aluminum-cased gearbox, making driving safer and easier. In addition to adding a small fuel tank, this northern version has a main fuel tank with a double refueling port. 0# and 35# diesel are separated into two oil chambers. The auxiliary oil chamber is activated in a low-temperature environment and the main oil chamber is heated by circulating water. Solve the problem of oil pipe freezing and difficulty in oil flow under extreme cold conditions, and save fuel costs. I don’t know if you have noticed that the balance shaft suspension structure of Hongyan tractors is very special and different from other domestic manufacturers. Hongyan calls it "under-hung leaf spring", which means that the steel plate is installed under the balance shaft. It is completely opposite to other brand models. This special structural design is for lightweight and can reduce the weight of Hongyan's previous steel plate suspension. It weighs about 180 kilograms and can also lower the center of gravity a little. Finally, this car adopts cab rearward movement technology. In the event of a collision, the cab can instantly move back 500mm.