Pentium X40 maintenance light reset steps diagram, Pentium X40 maintenance wrench how to remove

PentiumX40Maintenance light reset steps:

1. Turn off the ignition switch;

2. Press and hold the two arrow buttons at the same time, and then turn on the ignition switch;

3. After turning on the ignition switch for about 3 seconds, release the two arrow buttons;

4. At this time, the maintenance menu will appear on the display screen, asking whether the maintenance is reset to zero;

5. Press and hold the SET (return to zero) button for more than 3 seconds;

6. Press the MODE button;

7. Turn off the ignition switch, restart the car, and the maintenance light will return to zero.

The small wrench on the dashboard is the maintenance light of the car. If it is on, it means that the car needs maintenance. Regular car maintenance can improve the performance of the car and prolong the service life of the car; according to the relevant car maintenance test plan, if the car is properly maintained, it can save 11.36% of fuel during driving; and after the maintenance of the whole car, when the car is idling, the CO emission is reduced by 45.37%.

The main item of small maintenance is to replace the engine oil and filter, so the price will not be very high, around 500-800 yuan; if it is a major maintenance, then the maintenance items will increase, and the price will naturally increase a lot, around 1000-1500 yuan.

In addition, it is best to go to a 4S store for maintenance of a new car. Simple maintenance, although the items are the same, but the 4S store only serves one brand of cars, has all the information of the vehicle, and has a better understanding of the car, so the maintenance will be more professional. There will also be a complete set of maintenance records in the 4S shop for maintenance and repair, which is conducive to the investigation of the fault problem and the follow-up tracking of the accessories after the car breaks down.