How to eliminate Chery E3 maintenance light?How to remove Chery E3 small wrench


Product Overview
CheryE3 Maintenance Light Elimination Diagram: 1. Turn off the ignition switch, so that the instrument is in a power-off state; 2. Press and hold the box button on the upper right side of the instrument;
Key Features
- Meet or exceed OEM requirements
- 2 years warranty
- Strict quality control
- Complete testing from material to product
Quality Assurance
CheryE3 Maintenance Light Elimination Diagram:
1. Turn off the ignition switch, so that the instrument is in a power-off state;
2. Press and hold the box button on the upper right side of the instrument;
3. Turn the ignition switch to the "ON" position;
4. After the car is powered on, it will start self-inspection. At this time, keep pressing the box button,Wait for a few seconds and the maintenance light will disappear.
The maintenance light is on, indicating that the car needs to be maintained. The maintenance time is as fast as 40 minutes, and as slow as two or three hours. The specific maintenance time is uncertain, and the time depends on the number of maintenance items that the car needs.
The main item of small maintenance is to replace the engine oil and filter, so the price will not be very high, around 500-800 yuan; if it is a major maintenance, then the maintenance items will increase, and the price will naturally increase a lot, around 1000-1500 yuan.
The benefits of maintenance
1. Regular maintenance of the car can improve the performance of the car and prolong the service life of the car;
2. Save fuel. According to the relevant car maintenance test plan, if the car is properly maintained, it can save 11.36% of fuel during driving;
3. Reduce emissions. The same car maintenance test plan shows that after the maintenance of the whole vehicle, when the vehicle is switched to idling, the CO emission is reduced by 45.37%.
In addition, after the maintenance of the car, the maintenance should be cleared in time. Although the maintenance light will not affect the performance of the vehicle, it will cause trouble for the next replacement of auto parts, that is, it is impossible to know exactly when the new parts are used.
| Material | High-tensile steel / forged aluminum |
|---|---|
| Finish | E-coat / powder paint / zinc plating |
| Standards | IATF / ISO-based process control |
| Warranty | 24 months |
| MOQ | 50-100 pcs per reference |
| Lead Time | 25-35 days after PO |
Compatible Brands:
Toyota, Honda, Nissan, BMW, Mercedes-Benz, Ford, Hyundai, Kia, Volkswagen, Land Rover, and more...
Request a Quote
Just for B2B inquiries, no retail please. We'll get back to you within 24 hours.

