How to reset the new Santana maintenance light, how to clear the Volkswagen Santana maintenance light

SantanaTo reset the maintenance lamp to zero:

1. Turn off the ignition switch and turn off the engine.

2. Press the right button (return to zero/reset) on the instrument panel with your left hand, the position of the button is shown in the figure above.

3. Keep pressing the right button with your left hand, and turn on the ignition switch at the same time.

4. Keep pressing the "Zero/Reset" button with your left hand and wait until the maintenance light enters the reset mode, then release the right button (Zero/Reset button).

5. Within 20 seconds of releasing the right button, press the left button "menu button" once to confirm reset.

According to the above process, the maintenance cycle indicator will be cleared and return to the normal display mode.

Do not reset the maintenance display between maintenance intervals as this may result in an incorrect display. The maintenance reminder function is only an auxiliary function, and the detailed maintenance interval should also be implemented in accordance with the maintenance regulations. If the car battery is disconnected for a long time, it may not be possible to correctly calculate the time when the next maintenance is due. To check the maintenance information, you only need to press and hold the "reset" button on the premise of turning on the ignition switch of the car, and then release it until the display shows the text maintenance.