The door is closed, why is the indicator light still on?

while using the vehicleDiscoverThe door was closed, but the lights inside the car were still flashing. There may be many reasons for this situation.

One of the possibilities is that the door lock is not fully stuck due to the owner not closing the door hard enough. At this time, the owner only needs to open and close the door again to eliminate the fault warning light. Another possibility is that the on-board computer misjudged and caused a wrong alarm signal. This situation is relatively common, and sometimes it may need to wait for the vehicle to perform a full line inspection before it disappears automatically. If the fault prompt exists for a long time, you can go to a 4S shop or an auto repair shop to use a fault diagnosis instrument to eliminate the fault code and replace the sensor.

While a solid door light may only be an apparent glitch, the problem cannot be ignored. If the vehicle door suddenly opens while the vehicle is in motion, traffic accidents are likely to occur. In addition, if the door is not handled in time, the door may be accidentally opened and serious injury may result. Therefore, when using the vehicle on a daily basis, the owner should carefully check whether the door is closed tightly, and if there is a relevant fault prompt, it should take relevant measures as soon as possible to solve it.