How to match after cleaning the throttle body

Throttle valve matching needs to be connected to a decoder, and the original data can be cleared through the decoder prompt, and then the new actual data can be filled in to complete the matching. Usually, it is necessary to go to a 4S shop to connect a driving computer with a decoder to a logistics professional for operation. of.

Throttle valve matching is mainly for the best working state of the engine, to better adjust the idle speed, control the fuel injection volume and adjust the shift point. The driving computer needs the throttle valve to input the status data in real time, and after the data changes, the driving The computer will automatically adjust the data, once the set value is exceeded, the engine will malfunction abnormally. Therefore, after cleaning the throttle valve, it is necessary to match the latest status data of the throttle valve to the computer board, so that the computer board can adjust the original working mode according to the new data. Under normal circumstances, the throttle valve is recommended to be cleaned and maintained every 15,000 kilometers, and it must be re-matched after each cleaning. If the throttle valve is not cleaned regularly, there may be abnormal idle speed, slow shifting and high fuel consumption.