okmad#okmadautoparts.com +86 139-6450-2388

How to change engine oil in a car ?disposing of or mixing remaining oil

Apr 16, 20265viewsBlogs

Product Overview

How to change engine oil in a car Changing your car's engine oil is an essential part of vehicle maintenance. It helps to keep the engine running smoothly and prolongs its lifespan. In this article, we will provide

Key Features

  • Meet or exceed OEM requirements
  • 2 years warranty
  • Strict quality control
  • Complete testing from material to product

Quality Assurance

Chemical Analysis
Hardness Test
Surface Test
Dimension Check
Salt Fog Test
Fatigue Test
Fast worldwide shipping Quality guaranteed

How to change engine oil in a car

Changing your car\'s engine oil is an essential part of vehicle maintenance. It helps to keep the engine running smoothly and prolongs its lifespan. In this article, we will provide you with a step-by-step guide on how to change engine oil in a car, the easy way.

Tools and Materials Needed

Before we begin, you will need the following tools and materials:

- Wrench

- Oil filter wrench

- Oil drain pan

- Funnel

- New oil filter

- New engine oil

Step 1: Prepare the Car

Park your car on a level surface and turn off the engine. Open the hood and locate the oil cap. Remove it and set it aside. This will help the oil flow out more easily.

Step 2: Drain the Old Oil

Locate the oil drain plug underneath the car. Place the oil drain pan underneath it. Use a wrench to loosen the plug and remove it. Allow the old oil to drain completely into the pan.

Long sentence: It is important to make sure that all the old oil is drained out completely, as leaving even a small amount of old oil in the engine can affect its performance and cause damage over time.

Step 3: Replace the Oil Filter

Locate the oil filter and use the oil filter wrench to loosen and remove it. Dip your finger in the new engine oil and smear it onto the rubber gasket of the new oil filter. This will help create a tight seal. Screw the new oil filter into place by hand, and then tighten it with the oil filter wrench.

Step 4: Add New Oil

Using a funnel, pour the new engine oil into the oil filler hole. Refer to your car\'s manual for the correct type and amount of oil needed. Once you have added the oil, replace the oil cap and start the engine. Let it run for a few minutes to distribute the new oil throughout the engine.

Long sentence: It is important to check the oil level with the dipstick after adding new oil, and make sure that it is at the correct

MaterialHigh-tensile steel / forged aluminum
FinishE-coat / powder paint / zinc plating
StandardsIATF / ISO-based process control
Warranty24 months
MOQ50-100 pcs per reference
Lead Time25-35 days after PO
Passenger Cars
SUVs & Pickups
Commercial Vehicles
Off-road Vehicles

Compatible Brands:

Toyota, Honda, Nissan, BMW, Mercedes-Benz, Ford, Hyundai, Kia, Volkswagen, Land Rover, and more...

Request a Quote

Just for B2B inquiries, no retail please. We'll get back to you within 24 hours.

Phone+86 139-6450-2388
WhatsApp+86 139-6450-2388