Sega gearbox oil replacement tutorial

First let all the waste oil in the car flow out, wait until the last oil tank, carefully remove the transmission oil filter, take off the oil bottom gasket and clean it carefully, dry the filter device with cotton wool, and then add oil after installation Enough.

When letting all the oil in the car flow out, pay attention to the last oil tank. There will be a lot of waste oil in it. Be careful to hold the oil tank. After taking out the oil tank, you will see a lot of stains on the bottom. You can see the electromagnetic Valve, at this time, the cleaning work will start. The stain must be cleaned, otherwise there will be oil stains in the later use. After cleaning all the parts of the transmission oil tank, wipe the replaced parts clean to avoid contamination. In the event of oil leakage, you must pay attention to the tight fit when reassembling, so as to avoid oil leakage during driving, then dry the shell of the oil filter, fix the two corners, and then tighten them. Check again that it is safe, and finally pour the oil into it.