What is the function of plunger type A fuel injection pump

The plunger-type A-type fuel injection pump of the automobile is a tool for changing the relative position of the plunger and the plunger sleeve for the automobile and changing the fuel supply of the automobile fuel injection pump. It can adapt to the requirements of the engine under different working conditions and make the automobile more stable. good driving.

The oil pump is a tool used as a power source for various hydraulic devices. When installing the high-pressure oil pump, in order to prevent debris from falling into the machine, all the holes should be covered, and the machine group should be placed on the foundation with anchor bolts. After finishing the pipeline and confirming the direction of rotation of the motor, connect the coupling and install it, then try to run it for two to three hours for the final inspection. If there is no adverse phenomenon, it is considered that the installation is qualified and can be used normally. A filter should be installed on the rubber, and the effective cross-section of the filter should be 2 to 3 times larger than the cross-section of the suction pipe to prevent debris from entering the pump.