【Owner's home car knowledge】When driving on the road, you will inevitably encounter some unavoidable failures. In some cases, you need to go to the repair shop for maintenance immediately, but in some cases, you can solve them simply by yourself without spending a penny. If you are in a remote suburb or it is inconvenient to go to a 4S shop when you encounter a fault, it is very important to learn these simple fault handling skills yourself. The so-called "prolonged illness becomes a doctor", by learning and mastering some simple emergency repair methods , came in handy at critical moments.
Problem: Vibration when starting the car in the morning
analyze:Jittering during cold start is a common problem of many gasoline engine models. The main reason is that the combustion in the cylinder is not complete, resulting in insufficient power of the vehicle, and the vehicle shakes.
Quick fix:If the valve is not closed tightly due to the poor work of individual cylinders, you can run for a while at high speed in the 3rd or 4th gear, and the symptoms will disappear. If the hot car does not vibrate but the shifting is not smooth, it may be that the fuel injection volume of the fuel injector is uneven, and it nee
【Owner's home car knowledge】When driving on the road, you will inevitably encounter some unavoidable failures. In some cases, you need to go to the repair shop for maintenance immediately, but in some cases, you can solve them simply by yourself without spending a penny. If you are in a remote suburb or it is inconvenient to go to a 4S shop when you encounter a fault, it is very important to learn these simple fault handling skills yourself. The so-called "prolonged illness becomes a doctor", by learning and mastering some simple emergency repair methods , came in handy at critical moments.
Problem: Vibration when starting the car in the morning
analyze:Jittering during cold start is a common problem of many gasoline engine models. The main reason is that the combustion in the cylinder is not complete, resulting in insufficient power of the vehicle, and the vehicle shakes.
Quick fix:If the valve is not closed tightly due to the poor work of individual cylinders, you can run for a while at high speed in the 3rd or 4th gear, and the symptoms will disappear. If the hot car does not vibrate but the shifting is not smooth, it may be that the fuel injection volume of the fuel injector is uneven, and it needs to be checked and cleaned, and then it needs to be handled by a professional maintenance organization.
Fault: Feeling that the brakes are not as good as before
analyze: For driving, the most terrifying thing is brake failure. As the most basic, most important, and core active safety technology, brakes are almost the key to car safety. Sometimes we encounter that the brakes are not completely out of order, but it is obvious that the pedal is low and soft when stepping on the brakes, and it is obvious that the braking force is not enough.
Quick fix:Stepping on the brakes vigorously while waiting for a red light can improve the phenomenon. If the improvement effect is not obvious, or the brake system plate has reached the end of its service life, it needs to be replaced and repaired immediately.
Fault: The vehicle goes off track
analyze:When most drivers find that the car is going off track, their first thought is to do four-wheel alignment, but it is not the case. There are many reasons for the car to deviate, such as the degree of tread pattern wear is not the same as the deviation, the design of the suspension system is wrong, or the suspension is injured, deformed, displaced, and so on. Although there are many reasons, when the car is found to be off-track, the most important thing that should be brought to the attention of the car owner is whether there is any abnormality in the tire and suspension system.
Quick fix:Adjusting the air pressure of the front wheel in the direction of deviation or lowering the pressure of the tire in the other direction will improve the slight deviation. If it cannot be improved, go to a professional repair shop for inspection immediately.
Fault: The door handle is loose or the key becomes tight and astringent
analyze:Long-term use will inevitably cause wear and tear. When the door handle is loose or it is difficult to turn the key, do not pull it hard to avoid unnecessary losses.
Quick fix:Open the front door, you will see a plastic cover on the side, open it and you will see a screw inside, loosen it a few times, the lock cylinder can be pulled out from the outside, and there is a pull wire inside to buckle the handle, adjust the tension of the pull wire That's it. The screws of the rear door are blocked by sealing strips, and they are opened by hand. Before installation, the inside of the lock cylinder is coated with grease, so that the handle and lock on the door will be easy and restored as before.
Fault: fuel tank damage
analyze:When a motor vehicle is in use, especially when driving in areas with poor road conditions, fuel tank damage may occur.
Quick fix:If you find that the oil tank is leaking, you can wipe off the oil leak, and apply soap or bubble gum to the oil leak to temporarily block it. If possible, repair with epoxy resin adhesive, the effect is of course better.
Fault: broken tubing
analyze:After the continuous test of cold and hot weather, many rubber parts of the vehicle will naturally age. At this time, if the oil pipeline has aging and leakage, it will not only affect the normal driving of the car, but also cause the danger of spontaneous combustion. Therefore, the direct way to encounter this situation is to first solve the problem of plugging.
Quick fix:When you find that the oil pipe leaks, you should stop driving immediately, turn off the engine, and check the leak point at the same time, then wipe the surface of the oil leak, then use soap or bubble gum to block the leak, and finally wrap it tightly with adhesive tape to make it to the nearest repair shop as soon as possible.
Fault: Various pipelines are broken
analyze:After long-term use, all kinds of pipelines are aging. If it is broken and continues to drive, it is very prone to dangerous situations.
Quick fix:If the pipeline is broken, you can use the inflatable leather tube on the car, take an appropriate length, insert the two ends into the broken leather tube respectively, and then tie it tightly with iron wire or tape to ensure no leakage. The tubing is most likely to break near the horn. If you encounter this situation, first remove the pipe, file or grind the broken end of the pipe with a file, use a cross screwdriver and a tapered punch, and gently pry around the mouth of the pipe to make a simple bell mouth. In this way, it is also air-tight and oil-tight when used.
Fault: Oil leakage from oil pipe joint
analyze:When using a motor vehicle, if the engine oil pipe joint leaks oil, it is mostly caused by the oil pipe bell mouth and the oil pipe nut not being sealed.
Quick fix:Cotton yarn can be used to wrap the lower edge of the horn, and then tighten the tubing nut and the tubing joint; you can also chew bubble gum or maltose into a paste, apply it to the socket of the tubing nut, and seal it after it dries.
Fault: The inlet and outlet hoses are broken
analyze:The hose will age and break easily after long-term use. If the hose breaks during driving when water enters the radiator, the high-temperature water splashed out will form a large group of water vapor and spray out from under the engine cover. When this phenomenon occurs, Choose a safe place to stop immediately, and then take emergency measures to solve it.
Quick fix:When the radiator enters the water, the joint of the hose is most likely to crack and leak. At this time, you can use scissors to cut off the damaged part, and then reinsert the hose into the radiator water inlet joint, and fasten it with a clip or wire.
If the crack is in the middle of the hose, you can wrap the leaking crack with adhesive tape. Wipe the hose clean before wrapping it up. After the leaking part is dry, wrap the adhesive tape around the leaking part of the hose. The pressure is high, so wrap the tape as tightly as possible. If you don't have tape on hand, you can also wrap plastic paper around the rip first, then cut old cloth into strips and wrap it around the hose. Sometimes the hose has a large gap, and water may still leak after being entangled. At this time, the water tank cover can be opened to reduce the pressure in the water channel and reduce leakage. After taking the above measures, the engine speed should not be too fast, try to drive at a high gear, and pay attention to the pointer position of the water temperature gauge during driving. If the water temperature is too high, stop the car to cool down or replenish cooling water. Of course, the most important thing is to replace the new water pipe as soon as possible.
Fault: Broken fan belt
analyze:Fan belts generally use A-type V-belts, because they are relatively thin rubber products, which are easy to wear and break. Therefore, the fan belt is a must-have spare for driving. But in fact, due to untimely replenishment or other reasons, not many people often keep spare fan belts in the car. Therefore, we can often see cars on the road that have broken down because the fan belt is broken and there is no spare, causing the engine to overheat and break down. Usually the fan belt does not break suddenly. In most cases, the rubber part is worn out first due to long-term adjustment and slack. The cracked belt causes the belt to detach from the belt pulley. Therefore, it is not difficult to find if it can be checked early. But many people tend to ignore the inspection at this time, thinking that the belt has accidentally fallen off during the rotation, and after installing it, they continue to move on. As a result, the cracks in the belt become deeper and deeper, and finally they are completely broken, making it impossible to move on.
Quick fix:If it is discovered late and the belt is broken during the journey, charging will be stopped immediately and the charging warning light will be on. At this time, you should stop immediately, otherwise the engine will overheat soon and you will still be unable to continue driving. The broken fan belt has the size printed on it. If you can't find a car repair shop nearby, you can take the original belt and go to the hardware store to buy it according to the size marked on it. If you can't buy it, you can also find a way to buy or borrow a pair of women's nylon stockings, scratch the three belt pulleys of the crankshaft, water pump, and generator, try to tighten them as much as possible, and cut off the remaining overgrown parts. Taking this method, as long as the driving speed is not very fast, you can guarantee that you will drive the car back safely. If you are not driving at night and you are not far from your destination, you only need to connect the crankshaft and the belt pulley of the water pump to reduce the load. At the same time, the two wheels are easier to tighten. Step on the accelerator while driving to be more relaxed. Otherwise, if you add too much oil, the nylon stockings will be slippery and cannot move the belt pulley.
