Should the windshield wipers be erected in snow?Why do snow wipers stand up?


Product Overview
best in snowWiperPut it up, that is, let it stand up, so that it can better prevent the wiper from being frozen due to the low temperature. The wiper is a rubber product, and the temperature of the rubber is limited. If
Key Features
- Meet or exceed OEM requirements
- 2 years warranty
- Strict quality control
- Complete testing from material to product
Quality Assurance
best in snowWiperPut it up, that is, let it stand up, so that it can better prevent the wiper from being frozen due to the low temperature. The wiper is a rubber product, and the temperature of the rubber is limited. If it is frozen by ice and snow for a long time, it will be very damaged and the service life of the wiper will be shortened. In summary, when it snows, it is necessary to erect the wipers.
When the wiper is frozen, the wiper cannot be turned on immediately to let the wiper remove the ice on the glass, because it will damage the motor of the wiper. The correct way is to use a shovel to remove the ice slag first, or turn on the heater of the vehicle, and the ice slag will slowly melt away.
Steps for erecting wipers when it snows
1. First, the vehicle needs to be turned off, and within 10 seconds after turning off theglass of waterPress the switch of the steering wheel, and then operate the lever on the right side of the steering wheel to control the wiper;
2. After the glass water switch is pressed, the wiper blade will slowly turn to the middle of the windshield. At this time, the wiper blade can be manually erected;
3. If the glass water switch is not turned on, the wiper is directly erected, because it is hard to break if it is erected directly, and the wiper is easy to be damaged;
4. If you want to lay the wiper flat, you need to return the wiper to the middle position, and then turn on the switch of the wiper when the vehicle is powered on.
In summer, the wiper can also be erected. If the glass is exposed to the sun, the temperature will be relatively high. If the wiper is always on the windshield, the rubber of the wiper will harden, which will directly affect the service life.
| Material | High-tensile steel / forged aluminum |
|---|---|
| Finish | E-coat / powder paint / zinc plating |
| Standards | IATF / ISO-based process control |
| Warranty | 24 months |
| MOQ | 50-100 pcs per reference |
| Lead Time | 25-35 days after PO |
Compatible Brands:
Toyota, Honda, Nissan, BMW, Mercedes-Benz, Ford, Hyundai, Kia, Volkswagen, Land Rover, and more...
Request a Quote
Just for B2B inquiries, no retail please. We'll get back to you within 24 hours.

