How to remove and install Mercedes-Benz wiper?

mercedes benzWiperThe disassembly of the wiper is relatively simple, there will be a buckle in the middle of the wiper, press the buckle, so that thewipersIt is completely separated from the wiper arm, and then the wiper arm can be pulled out by pulling the wiper arm to the left, and then the wiper can be disassembled.

Mercedes Benz vehicle wiper replacement steps

1. First, you need to move the wiper towards the front of the car. When it reaches a certain position, it will be fixed. Find and press the fixing button of the wiper, then hold down the wiper blade and shake it upwards. This will remove the old strip;

2. When putting the wiper arm back, do not throw it down directly, because the glass is easily damaged. Put a towel on the glass in advance, so that the glass will not be easily scratched;

3. When installing a new rubber strip, first use your fingers to stretch the metal sheet, that is, let the metal sheet stagger, so that the rubber strip can be placed better, and the new rubber strip is inserted from the first groove, which requires a better Patience, install one side and then install the other side;

4. After the new rubber strip is installed, install the wiper according to the steps of removing the wiper in reverse order, so that the wiper can be installed.

If the owner does not know how to replace the wiper, he can directly drive the vehicle to a professional maintenance organization to replace it, or read the vehicle's instruction manual. There are specific steps in the instruction manual. If the hands-on ability is not strong, it is better not to replace it. When using the wiper normally, it is necessary to regularly check whether the wiper water is sufficient. When there is a lack of wiper water, it is not recommended to turn on the wiper.