Is the eps light on and off after restarting, can I drive?

EPS is an electric power steering system, which plays a good role in assisting the steering of the vehicle. When the EPS light is on on the dashboard, the owner restarts the vehicle. After ignition, the EPS light goes out. It is recommended to drive. If it is relatively close to a professional repair shop, you can drive to the repair shop at a low speed. If the road is far away, you need to call a tow truck to transport the vehicle to the repair shop or 4s shop for maintenance.

What are the reasons for the car EPS light to come on?

1. There is a fault in the steering machine. At this time, the steering wheel will be relatively heavy, and it will be more difficult to turn the steering wheel;

2. The EPS driving computer module is faulty. There is no problem at first, but the driving computer cannot analyze the data, so the EPS light is on, and the driving computer module needs to be repaired;

3. There is a lack of steering fluid. The steering fluid may be consumed naturally, or it may be leaking. It is necessary to find the leaking part for maintenance, and then add an appropriate amount of steering fluid to eliminate the EPS light;

4. There is a fault in the steering angle sensor. The steering angle sensor is used to judge the steering angle of the vehicle. to replace it.

Symptoms of EPS failure

1. The steering wheel will vibrate seriously; 2. The speed of the steering wheel returning to the center will be much slower; 3. When the vehicle is turning, there will be a large abnormal sound.