How to start the automatic transmission when the car battery is dead?

If the battery of the automatic transmission car is out of power, the vehicle can be started by connecting the battery to the battery, and the mobile emergency power supply can also be used to charge the battery to start the vehicle. The clip on the mobile emergency power supply needs to be clamped to the terminal of the vehicle battery, and finally find and press the switch on the mobile emergency power supply, so that charging can start.

Steps to start the automatic transmission vehicle with the battery

1. First, you need to prepare two battery cables, one is the red battery cable, and the other is the black battery cable. You also need to have a vehicle that can start normally. Put the fronts of the two vehicles together without being too far apart. , so that it will be better to connect and charge;

2. Call the hoods of the two vehicles, and then you can see the battery. You need to disconnect the power supply of the dead vehicle, which can better prevent the electrical equipment of the vehicle from being burned out;

3. The gears of vehicles without electricity and vehicles with electricity need to be hung on the P gear, so that the vehicles cannot move, which can improve safety;

4. The battery has a positive pole and a negative pole. The owner needs to distinguish the positive and negative poles of the battery. The red battery wire is used to connect the positive pole, and the black battery wire is used to connect the negative pole;

5. First connect the positive pole of the battery, the two clips of the red battery wire are clamped on the positive poles of the two batteries respectively, and then connect the negative pole, the two clips of the black battery wire are respectively clamped on the negative poles of the two batteries;

6. After the battery cable is set up, it is necessary to start the vehicle with electricity. The vehicle with electricity will charge the battery of the vehicle with no electricity. With a small amount of power, it can be started directly;

7. To remove the battery cable, you need to remove the negative power cable first, then remove the red power cable, and finally put the engine cover on.