Correct parking method of electronic handbrake

The braking method of the electronic handbrake is actually to have the effect of parking brake after the friction between the brake pad and the brake disc reaches a certain level. But for the correct use of electronic handbrake, many car owners do not know. Therefore, car owners must follow the steps below to operate the electronic handbrake correctly, otherwise problems will easily occur.

The correct way to use the electronic handbrake when parking

In the process of parking, car owners are very likely to use the electronic handbrake, so the correct use steps are as follows:

1. The way of using the electronic handbrake when parking with manual transmission requires the owner to step on the clutch in advance and lightly step on the brakes to keep the car in a stationary state. At this time, it is necessary to put the electronic handbrake in neutral and then lift it up, or Pull upwards, and a sound will be heard at this time. At this time, the car dashboard will also display a red light of the electronic handbrake. At this time, it means that the electronic handbrake has been activated.success.

2. The way to use the electronic handbrake when the car with automatic transmission is parked, in fact, the owner needs to step on the brake lightly to keep the car in a relatively static situation, then put on the P gear, and then lift up the electronic handbrake. At this time, the lock will also be heard. The sound, and the red electronic handbrake symbol will also be displayed on the dashboard in front of the car. In this case, it also means that the electronic handbrake of the automatic transmission vehicle has been turned on successfully.

Especially in the process of using the electronic handbrake, car owners must pay attention to when parking, and must not forget to lift the electronic handbrake up, otherwise it is likely to cause the car to slip.