Where is the antifreeze added? The picture is normal

In fact, most car owners don't know what kind of position their landlord needs to add. In most cases, the position between the highest water level or the lowest water level in the antifreeze pot is a comparison suitable. If there is no water level line in the antifreeze pot, you can also use the midline in the pot as a reference, which is basically slightly higher than the midline.

If there is a scale line on the antifreeze pot, then it needs to be added to the middle position between the upper scale line max and the lower scale line min. Moreover, in the process of adding antifreeze, the most needed and most noteworthy thing for car owners is that the amount of antifreeze should not be too much, nor should it be too small.

Too much or too little antifreeze will affect

Adding a lot of antifreeze will cause the antifreeze to overflow from the pot. You must know that antifreeze is corrosive to a certain extent and will definitely cause damage to some parts inside the car. The second is that if the antifreeze is added less, it is likely to affect the freezing of the water tank and the engine in low temperature weather, or it will not be able to achieve the corresponding cooling effect, which will cause the engine to malfunction.

So to sum up, the antifreeze must be added to a very suitable position, so that the best effect of the antifreeze can be exerted. Moreover, the most important function of antifreeze is to prevent freezing, high temperature, corrosion, and scale.