Easy way to clean the ABS sensor, how to clean the ABS sensor

absThe sensor is an important part of the abs system. It is generally located at the position of the tire close to the bearing.Wheel hubThe outside of the bearing, the inner ring of the brake disc, each wheel has. During the use of the car, the tires are easy to stain the abs sensor, which will affect the accuracy of its data. If the abs sensor is not cleaned for a long time, it is easy to damage the sensor and cause the abs to fail, thereby affecting driving safety. How to clean the abs sensor if it is dirty? The following is the cleaning process.

How to clean abs sensor diagram

1. Use a jack to disassemble the car tire;

2. After the tire is disassembled, you can see the brake disc. The abs sensor is usually on the inner ring of the brake disc, and you can see it when you stick your head in;

3. The ABS sensor is fixed by hexagon socket screws, use a screwdriver to unscrew the screw, and take out the abs sensor;

4. After taking it out, spray the sensor head with a cleaning agent (mild type), spray clean the carbon and dirt on the head, and then wipe it with a rag;

5. Then connect the cleaning agent nozzle to the thin tube, extend it through the screw hole for spray cleaning, until the dirty water becomes clean, dry it and install it back according to the original steps.