A good way to clean the exterior surface of a car water tank, how to clean the exterior of the water tank

The best way to clean the exterior of the car's water tank is to rinse it with water. The simplest water wash can clean the exterior of the water tank.The specific method is as follows:

1,Since car water tanks are basically hidden in the engine bumper, the bumper needs to be removed before cleaning. When disassembling, make sure that all the fixing screws have been unscrewed, and at the same time, slowly disassemble from both ends to the middle, and don't break the fixing buckle.

2,After removing the bumper, we can see the location of the water tank very intuitively. Adjust the muzzle of the water gun into a spray shape, and adjust the pressure to an appropriate size, and then rinse the surface of the dirty water tank.

3.After the washing is completed, check whether the heat sink is broken, if any, use tweezers or a bamboo stick to straighten it. After all inspections are completed, install the bumpers in the reverse order of disassembly to complete the cleaning of the water tank radiator.

As the most important heat dissipation device in the engine cooling system, the water tank (radiator) is not only the return channel of the engine cooling system's large circulation, but also the core component for cooling the coolant and maintaining the normal operating temperature of the engine.

Since the water tank radiator mainly achieves the purpose of rapid heat conduction by shunting and increasing the contact area between the coolant and the tube wall of the radiator, finally the heat conducted by the cooling fluid from the radiator tube is dissipated into the air through the heat sink. . Therefore, after long-term use, dirt will inevitably be attached to the radiator, and the accumulation of dirt will inevitably affect the heat dissipation efficiency of the radiator.