How to clean the dirty radiator of the water tank?How to clean the dust of car radiator

In view of the dust and dirt on the exterior of the car's water tank, we generally use water washing to achieve the purpose of cleaning. The specific methods are as follows:

1. Since the car water tank is basically hidden in the engine bumper, the bumper must be removed before cleaning. When disassembling, make sure that all the fixing screws have been unscrewed, and at the same time, slowly disassemble from both ends to the middle, and don't break the fixing buckle.

2. After removing the bumper, we can see the location of the water tank very intuitively. Adjust the muzzle of the water gun into a spray shape, and adjust the pressure to an appropriate size, and then rinse the surface of the dirty water tank.

3. After the rinsing is completed, check whether the heat sink is broken, if any, use tweezers or a bamboo stick to straighten it. After all inspections are completed, install the bumpers in the reverse order of disassembly to complete the cleaning of the water tank radiator.

The car water tank is also called the radiator. As the most important heat dissipation device in the engine cooling system, it is not only the return channel of the engine cooling system's large circulation, but also the core part of the coolant to dissipate heat and maintain the normal operating temperature of the engine.

The water tank radiator mainly achieves the purpose of rapid heat conduction by dividing the flow and increasing the contact area between the coolant and the tube wall of the radiator, and finally dissipating the heat conducted by the coolant from the radiator tube into the air through the heat sink. When used for a long time, dirt will inevitably be attached to the radiator. The accumulation of dust and dirt will affect the heat dissipation efficiency of the radiator. Therefore, it is necessary to clean the radiator to restore the radiator to a normal working state.