How to align the steering angle sensor when the steering angle sensor is reset

The steering angle sensor is a device used to detect the rotation angle, direction and speed of the steering wheel.When the steering wheel rotates, the steering angle sensor detects and outputs the steering signal, and the car electronic control unitYuanThe signal will be used to identify the steering angle, direction of rotation and speed of the steering wheel, so as to control the car to achieve steering.

If there is a deviation in the steering, you can reset the steering angle sensor, try to hit the steering wheel to the left, then to the right, and then return to the right. The car needs to be aligned after removing the steering wheel or replacing the steering motor, steering gear, airbag hairspring, steering column, and linkage rod. For the positive angle sensor, you need to use a dedicated decoder to enter the electronically controlled steering system for setting. The specific operations are as follows:

1. Use the decoder to enter 44 power steering, read the measured value, and adjust the zero position of the steering wheel;

2. Enter 03 brake electronic device, enter 11 to log in, access password 40168;

3. Select the basic settings, follow the prompts, enter 60 to activate, and perform zero calibration.