How to erect the wiper

When we wash the car, we oftenWiperStand it up so that you can more comprehensively remove impurities on the glass. So how to erect the wiper, in fact, the process is relatively simple, let's talk about the steps in detail below.

Turn off the car first, then turn it on within 10 secondsGlass of waterSwitch, pull the operating lever (to control the wiper) directly toward the driver, and some are turned on by physical buttons, depending on the model. Then the wiper will automatically turn to the middle position of the front windshield, and finally you can directly erect it manually. So if you want to reset, put the wiper back to the middle position, and then turn on the wiper switch when the power is on.

But it should be noted that do not directly turn on the wiper switch when the glass is not watery, otherwise it will rub against the front windshield and scratches will easily appear. After all, there are still some impurities. Attached to the glass. Also, in winter, especially those in the north, the ice ballast on the glass must be removed before operation, otherwise it may cause damage to the wiper blade.