How to replace the brake pads

Brake pads can be said to be the most important part of the brake system, and the quality of the brake pads is related to driving safety.sowhen weFindIf the car cannot be braked or the brake pads are worn to a certain degree, they need to be replaced in time. After all, every item has its own service life. Let's talk about how to replace the brake pads.

Steps to replace the brake pads:

1. First open the engine compartment and checkBrake fluidCheck whether the liquid level is in the normal position to avoid overflow during the process of replacing the brake pads.

2. Use a jack to align the support point at the bottom of the car. As for the support point, it needs to be marked by the car manufacturer. After all, the design of each car is different. After aligning the position, you can raise it, and remove the tire when it is completely off the ground.

3. Then you can use a wrench and a sleeve to remove the bolts of the brake caliper, and then directly remove the brake pads.

4. Push the brake piston back in and install the new brake pads and you are done. Of course, you have to install the original parts in the order of disassembly.

5Finally, after the installation is completed, you must check the brake fluid level. If you press the brake pedal a few times and the fluid level is still within the normal range, it means there is no problem.