The middle part of the new wiper cannot be wiped, adjust the angle of the wiper to adjust the video

The wiper strip is a rubber product. After a long time of use, it will age and become hard, and it will not be clean. It needs to be replaced regularly, usually once a year. However, the middle part of the wiper cannot be wiped after replacing the new wiper. I believe that many car owners have encountered this situation. What is going on?

The middle part of the new wiper cannot be wiped, which may be caused by insufficient wiper pressure.There is a spring in the wiper arm, andWiperThe down force provided by the spring can clean the windshield when it swings. If the wiper pressure is too small, the brush will not be clean. But this kind of wiper with spring cannot adjust the down force, it can only be solved by adjusting the angle of the wiper.

Adjust the wiper angle adjustment video

If the wiper angle is not good, you can changeWiperAfter loosening the screw at the base of the arm, adjust it to the correct position, tighten the screw and cover the dust cover.

If the angle of the wiper head is not good, it will cause the wiper strip and the windshield glass to not fit well, resulting in a situation where the wiper is not clean or the area cannot be wiped. In this case, after lifting the wiper, remove the wiper strip and adjust the angle of the wiper head with a wrench to fit the glass.