How much does it cost to replace the car air-conditioning filter element?


Product Overview
The position of the air-conditioning filter element is different for different models. The air-conditioning filter element of some cars is under the front windshield and is covered by the water diversion tank. When repla
Key Features
- Meet or exceed OEM requirements
- 2 years warranty
- Strict quality control
- Complete testing from material to product
Quality Assurance
The position of the air-conditioning filter element is different for different models. The air-conditioning filter element of some cars is under the front windshield and is covered by the water diversion tank. When replacing this type of filter element, the engine cover must be opened first and the fixed water tank should be removed. The air-conditioning filter element can be seen by removing the water trough. The air-conditioning filter element of most models is located behind the front glove box of the passenger seat. When replacing it, it needs to be removed through the glove box, and the air-conditioning filter element inside can be seen. Lower left.
Replacing the car air-conditioning filter tutorial
Shroud articles
1. Open the hood, and the air-conditioning filter element is covered by a plastic plate near the co-pilot;
2. Unscrew the screws on this plastic board, and then tear off a section of the front rubber strip, take off the plastic board and you can see the air conditioner filter element;
3. There is a buckle on each side of the air-conditioning filter element, and you can pull out the air-conditioning filter grid by opening the buckle outward;
4. Replace with a new one. There are two small openings on both sides of the filter element. Align the protruding areas on the filter element grid and install it back;
5. Put back the air conditioner filter grid, buckle the buckle, cover the plastic cover, tighten the screws, and then install the rubber strip to complete the replacement.
Glove Box
1. Open the glove box to the maximum position, you can see the fixed buckle, remove it, squeeze both sides of the glove box to the middle with both hands, the glove box can be removed;
2. Open the air conditioner air filter cover and pull out the air
| Material | High-tensile steel / forged aluminum |
|---|---|
| Finish | E-coat / powder paint / zinc plating |
| Standards | IATF / ISO-based process control |
| Warranty | 24 months |
| MOQ | 50-100 pcs per reference |
| Lead Time | 25-35 days after PO |
Compatible Brands:
Toyota, Honda, Nissan, BMW, Mercedes-Benz, Ford, Hyundai, Kia, Volkswagen, Land Rover, and more...
Request a Quote
Just for B2B inquiries, no retail please. We'll get back to you within 24 hours.

