How to replace the air conditioner filter, how to remove the car air conditioner filter

It is completely DIY to replace the air-conditioning filter, but you need to know how to remove the car air-conditioning filter. First of all, you must know where the air-conditioning filter is. The location of the air-conditioning filter element is different for different car models. Some cars have air-conditioning filter elements under the front windshield and covered by the diversion water tank, while the air-conditioning filter elements of most models are located behind the front glove box of the passenger seat, generally on the left. Lower side. How to replace the air-conditioning filter, the following specific removal and replacement operations in different positions:

Air conditioning filter element under the shroud

1. Open the hood, and the air-conditioning filter element is covered by a plastic plate near the co-pilot;

2. Unscrew the screws on this plastic board, and then tear off a section of the front rubber strip, take off the plastic board and you can see the air conditioner filter element;

3. There is a buckle on each side of the air-conditioning filter element, and you can pull out the air-conditioning filter grid by opening the buckle outward;

4. Replace with a new one. There are two small openings on both sides of the filter element. Align the protruding areas on the filter element grid and install it back;

5. Put back the air conditioner filter grid, buckle the buckle, cover the plastic cover, tighten the screws, and then install the rubber strip to complete the replacement.

Air conditioner filter element after glove box

1. Open the glove box to the maximum position, you can see the fixed buckle, remove it, squeeze both sides of the glove box to the middle with both hands, the glove box can be removed;

2. Open the air conditioner air filter cover and pull out the air conditioner air filter core;

3. Replace with a new air-conditioning air filter core. If the air-conditioning filter is not very dirty, it can be cleaned and used, except for activated carbon.

4. Install the components in the reverse order of disassembly, replace the cover, install the glove box, and close the buckle to complete the replacement.