How to use the car battery charger, how to use the battery charger

When the car has been running out of power to start the engine, it is naturally necessary to charge the battery, and using a battery charger can be said to be the most convenient way. But for some new friends of Xiaomeng, they may not be very familiar with the usage of battery chargers. So, how do you use the car battery charger? Today we will tell you how to use the battery charger.

First connect the positive pole of the charger to the positive pole of the battery, and the negative pole of the charger to the negative pole of the battery, and then press the charging button to start charging. But we don't have to wait for it to be fully charged before unplugging it. As long as there is enough power to start the car engine, why do we say that. It is necessary to know that after the engine is started, it will drive the engine through the leather belt, and the electricity sent out is rectified and stabilized to directly charge the car battery. It only takes one to two hours of normal driving to restore normal battery power.

Then it should be noted that do not overcharge the battery frequently. Although the current generated by the charger is not very large, because the electrolyte is in a boiling state for a long time, not only the fine particles on the surface of the active material are prone to fall off, but also if it is serious. It will cause the grid to oxidize and cause the active material to be loosely separated from the grid, so everyone must be fully energized when charging.