How to replace the sunroof sealing strip, the diagram of replacing the sunroof sealing strip

The skylight sealing strip can not only play a sealing role, but also has the effect of reducing noise. However, as a kind of rubber products, there is naturally a life span. When it is aged (hardened) to a certain degree, we need to replace it. So, how do you change the sunroof sealing strip? Today we will give you a diagram of how to replace the sunroof sealing strip.

Sunroof seal replacement diagram

1. First, pull out the old sealing strip of the skylight slowly along the track, and clean the gap inside.

2. Then, continue to follow the side track of the skylight and directly squeeze the new sealing strip in.

But it should be noted that when we install the sealing strip, we must reserve a drainage hole, otherwise the water from the sunroof will not be able to drain normally, and it will even directly penetrate into the car, which will have a big impact on the car body. Impacted.

3. Finally, we must carefully check whether there is any protruding part of the sealing strip. If there is, it means that the protruding part has not been fully installed. It is necessary to push the protruding part with a little force.