Headlight lampshade replacement is very simple, remove the headlight lampshade video tutorial

The lampshades of automobile headlights are mostly made of polycarbonate (PC) or polymethyl methacrylate (PMMA) plastic injection molding, which is prone to aging and yellowing over a long period of time, and cracks may also appear, which will affect automobile lighting. At this time, it should be replaced, and the replacement of the headlight shade is very simple. The specific operation is as follows:

1. Disassemble the headlight assembly. The headlight assembly is generally fixed by a buckle or screw. The headlight can be removed after the buckle is removed or the screw is removed. When disassembling, pay attention to protecting the wiring harness on the headlight. ；

2. Use a hot air gun to heat the surroundings of the lampshade. After softening the fixing glue of the lampshade, you can slowly pry open the lampshade. If there is no heat gun, you can use a high-power hair dryer or directly put it in hot water to burn it;

3. Remove the lampshade of the headlight, clean the glue in the groove, fill in a new sealant, press the new lampshade cover tightly, and wipe off the overflowing sealant;

4. Reinstall the headlight assembly after drying.

The headlight shade of some models is buckle fixed and sealed, and replacement is easier. The following is a video tutorial on removing the headlight shade for your reference: