okmad#okmadautoparts.com +86 139-6450-2388

Tips for detecting unqualified lights, tips for inspecting unqualified lights

Apr 20, 20268viewsBlogs

Product Overview

Coupe to detect unqualified lighting 1. First of all, the intensity of the light, whether it is the low beam or the high beam, must meet the detection standards (the low beam is not less than 1200 lumens, and the hig

Key Features

  • Meet or exceed OEM requirements
  • 2 years warranty
  • Strict quality control
  • Complete testing from material to product

Quality Assurance

Chemical Analysis
Hardness Test
Surface Test
Dimension Check
Salt Fog Test
Fatigue Test
Fast worldwide shipping Quality guaranteed

Coupe to detect unqualified lighting

1. First of all, the intensity of the light, whether it is the low beam or the high beam, must meet the detection standards (the low beam is not less than 1200 lumens, and the high beam is not less than 1450 lumens), and the color temperature of the light source cannot be higher than 6000K.

2. The second is the color of the light. Once you change it, no matter what the reason is, your car will not pass the annual review.

4. Then the angle of the light is also a key inspection item. If there is a left-right or up-and-down illumination deviation, you naturally need to go to the auto repair shop to adjust it.

5. I also want to remind everyone that modified headlights like angel eyes and devil eyes will not only fail the annual review, but will also be stopped by the traffic police.

I believe that everyone has a certain understanding of the annual car inspection after reading the tips for unqualified car lights. But everyone should pay attention to that, if the headlights of the modified car, regardless of whether they meet the standards, they must go to the vehicle management office for inspection, otherwise the traffic police will score 3 points and 200YuanPenalty.

According to the national standard "Technical Conditions for Safety of Motor Vehicle Operation", the lighting, signaling devices and other electrical equipment of motor vehicles have clear regulations and technical requirements. Individuals should also follow the configuration standards at the factory when they are repaired and replaced. For replacement, it is not allowed to install or change the original configuration of the motor vehicle in violation of regulations.

MaterialHigh-tensile steel / forged aluminum
FinishE-coat / powder paint / zinc plating
StandardsIATF / ISO-based process control
Warranty24 months
MOQ50-100 pcs per reference
Lead Time25-35 days after PO
Passenger Cars
SUVs & Pickups
Commercial Vehicles
Off-road Vehicles

Compatible Brands:

Toyota, Honda, Nissan, BMW, Mercedes-Benz, Ford, Hyundai, Kia, Volkswagen, Land Rover, and more...

Request a Quote

Just for B2B inquiries, no retail please. We'll get back to you within 24 hours.

Phone+86 139-6450-2388
WhatsApp+86 139-6450-2388