There is no water in the antifreeze spare pot, and the antifreeze is added directly to the water tank or the spare pot

If there is no water in the antifreeze spare pot, add it in time. The function of the antifreeze spare pot is to reserve a certain amount of antifreeze, which can supplement the lack of antifreeze in the water tank.

The antifreeze fluid needs to be added to the water tank and the spare pot, and it should be added in the cold car state to keep the antifreeze fluid level between the upper and lower engraved lines. This is the normal fluid consumption. Usually, the specific adding situation is to fill the water tank with antifreeze in the cold state, and the spare pot only needs to add about half a pot or add it to the scale line.

However, different models have different ways of adding antifreeze. Some are added through a spare pot, and some are added directly to the water tank. For this, please refer to the clear regulations in the driver's collection.

It is also necessary to pay attention to the use of antifreeze. It is forbidden to mix different brands and models of antifreeze, because different antifreezes have different compositions. If they are mixed, the antifreeze may lose its corresponding functions. It is forbidden to mix with water for use, because the tap water contains impurities, which will gradually produce sediments after long-term use, and finally affect the effect of antifreeze.

It is forbidden to directly add concentrated antifreeze. It is not that the greater the concentration of ethylene glycol in the antifreeze, the better. The direct use of concentrated antifreeze not only fails to meet the engine's demand for antifreeze, but will cause some undesirable phenomena, such as deterioration of the antifreeze, Increased viscosity at low temperature and high engine temperature.