The sequelae of changing manual transmission oil, manual transmission oil changed gears jerky


Product Overview
Under normal circumstances, there will be no sequelae after replacing the manual transmission oil, but it is not ruled out that the use of poor quality transmission oil, if this is the case, may cause undesirable phenome
Key Features
- Meet or exceed OEM requirements
- 2 years warranty
- Strict quality control
- Complete testing from material to product
Quality Assurance
Under normal circumstances, there will be no sequelae after replacing the manual transmission oil, but it is not ruled out that the use of poor quality transmission oil, if this is the case, may cause undesirable phenomena. The purpose of replacing manual gearbox oil is to better protect the gearbox and prolong its service life. The function of the transmission oil is to lubricate the internal parts of the transmission, and during the driving process of the vehicle, a higher temperature will be generated inside the transmission, and the transmission oil plays a role in cooling down.
If the gear is jerky after changing the manual gearbox oil, it may be that a relatively inferior gearbox oil is used. Therefore, when changing the manual gearbox oil, it is recommended to use a special car and not mix different gears. Tank oil, which has no effect on the protection of the transmission.
At the same time, it is recommended to go to a 4S shop or a better maintenance shop to change the transmission oil. They have professional maintenance personnel, and the replacement will be more skilled and appropriate.
Under normal circumstances, manual transmission oil is replaced in about 2 years or 60,000 kilometers, but the specific replacement time still depends on the actual use of manual transmission oil. However, if it is not replaced for a long time, the gearbox oil will deteriorate, which will reduce the lubrication effect, aggravate the wear of the internal gears of the gearbox, and reduce the service life of the gearbox.
| Material | High-tensile steel / forged aluminum |
|---|---|
| Finish | E-coat / powder paint / zinc plating |
| Standards | IATF / ISO-based process control |
| Warranty | 24 months |
| MOQ | 50-100 pcs per reference |
| Lead Time | 25-35 days after PO |
Compatible Brands:
Toyota, Honda, Nissan, BMW, Mercedes-Benz, Ford, Hyundai, Kia, Volkswagen, Land Rover, and more...
Request a Quote
Just for B2B inquiries, no retail please. We'll get back to you within 24 hours.

