The wiper nozzle is frozen, and the glass water nozzle is frozen. What should I do?

WiperThe nozzle is frozen and it is impossible to spray water to clean the front windshield. If it encounters bad weather or dust on the front windshield, it will greatly increase the potential safety hazard, which will affect the driver’s sight and prone to accidents, etc. .So whendiscoverIf the wiper nozzle is frozen, do not use the water spray function at this time, because it is easy to damage the motor.It should be defrosted in time, and thenGlass waterReplace it and use glass water with a lower freezing point.

The treatment method for the freezing of the glass water nozzle is to use warm water to rinse the glass water nozzle to melt the glass water in the nozzle. And if the glass water in the water tank is frozen, it should be thawed. The thawing methods are as follows.

1. If there is sun, you can drive the vehicle under the sun, open the hood, and then expose it to the sun to melt the glass water;

2. If the sun can't melt the glass water, you can try to pour an appropriate amount of warm water into the water tank to melt it, remember not to use hot water, because it is easy to cause the water tank to break;

3. If the glass water freezes more severely and the water tank is bursting, you can only go to the repair shop to find a professional master to deal with it.

When the glass is thawed, it should be replaced with a glass water with a lower freezing point to avoid the situation where the glass water freezes again. Glass water still plays an important role in our driving process. Although it is a consumable product, it is also a necessity. It should be used at all times.