No computer, after changing the electronic handbrake brake pad tutorial


Product Overview
Some car owners think that the price of the brake pads is more expensive after replacing the brake pads in the 4s shop, and they want to replace the rear brake pads of the vehicle by themselves. However, some vehicles ha
Key Features
- Meet or exceed OEM requirements
- 2 years warranty
- Strict quality control
- Complete testing from material to product
Quality Assurance
Some car owners think that the price of the brake pads is more expensive after replacing the brake pads in the 4s shop, and they want to replace the rear brake pads of the vehicle by themselves. However, some vehicles have electronic handbrakes. The electronic handbrake needs to use computer diagnosis when replacing the rear brake pads. Yi cansuccessReplace the brake pads, the car owner will be very upset, what should I do if there is no computer diagnostic device?
Without a computer diagnostic device, the tutorial of replacing the rear brake pads of the electronic handbrake:
1. Use a jack to jack up the vehicle, and then use a special tool to remove the rear wheel;
2. You will see the brake cylinder at the position of the brake pads, first remove the plug of the brake cylinder, and thenBrake FluidThe tube should be placed well to avoid oil leakage;
3. Use the battery to connect to the plug of the brake cylinder to release the electronic handbrake, then remove the old brake pads and install the new brake pads;
4. Use the battery to connect to the plug of the brake sub-cylinder to make the electronic handbrake return;
5. Install the brake cylinder and brake hose to their original positions, and install the tires.
Under normal circumstances, the brake pads need to be replaced after 40,000 to 60,000 kilometers. Because the brake pads will be polished and become very thin during driving, which affects the safety of the driving vehicle, it is necessary to replace the brake pads. Ensure the safety of car owners. If the owner's driving habits and driving environment are not very good, the brake pads will be severely worn and replaced in advance.
The thickness of the replacement brake pad is 2.5 cm. If the thickness is polished to 0.5 cm, it needs to be replaced. The vehicle brake system is braked by the friction generated by the friction between the brake pads
| Material | High-tensile steel / forged aluminum |
|---|---|
| Finish | E-coat / powder paint / zinc plating |
| Standards | IATF / ISO-based process control |
| Warranty | 24 months |
| MOQ | 50-100 pcs per reference |
| Lead Time | 25-35 days after PO |
Compatible Brands:
Toyota, Honda, Nissan, BMW, Mercedes-Benz, Ford, Hyundai, Kia, Volkswagen, Land Rover, and more...
Request a Quote
Just for B2B inquiries, no retail please. We'll get back to you within 24 hours.

