Battery wiring sequence

I believe we must have encountered such a problem when we usually use the car, that is, the car’s battery is dead. Facing this problem, many car owners must be at a loss, or call the repair shop in a hurry and ask the repair shop to bring someone to solve it. I don't know that we can do it ourselves, and start the vehicle by charging the battery.Let's introduce it nowHow to connect the battery and the sequence of the battery wiring.

Before energizing, you must first prepare a vehicle with a normal battery as a rescue vehicle, and then prepare the wiring. When you are ready, follow the steps below to get the call.

1.First find the batteries of the two vehicles, and ensure that the rescue vehicle is in a stalled state.

2.First use a wire to connect the positive poles of the batteries of both vehicles, and then use another wire to connect one end to the negative pole of the rescue vehicle battery, and the other end to the cylinder of the rescued vehicle’s engine (do not connect to the rescued vehicle’s battery). negative electrode).

3.After ensuring that the wires are connected correctly, start the rescue vehicle first, and then start the rescued vehicle.

4.Being rescuedsuccessThe wiring can be removed after starting, and the order of removal should be reverse to the order of installation. That is, first remove the negative electrode on the cylinder, then remove the negative electrode on the rescue vehicle, and finally remove the positive electrode of the rescue vehicle and the positive electrode of the rescued vehicle.

Notice:When connecting the negative pole, the end of the rescued vehicle must be connected to the engine. This can shorten the curre