How to charge the lead-acid battery for the first time, and the charging time


Product Overview
The first charge of a lead-acid battery is very important and will affect the battery's service life and charge capacity. If the charge is insufficient, the battery charge capacity is not high, which will reduce the serv
Key Features
- Meet or exceed OEM requirements
- 2 years warranty
- Strict quality control
- Complete testing from material to product
Quality Assurance
The first charge of a lead-acid battery is very important and will affect the battery's service life and charge capacity. If the charge is insufficient, the battery charge capacity is not high, which will reduce the service life; but if the battery is overcharged, although the electrical performance of the battery is good, it will also shorten its service life, so the new battery must master the time of the first charge. How to charge the lead-acid battery for the first time? How long will it take to charge?
For the first charge of a lead-acid battery, you need to use a regular charger, first charge the electrolyte with the initial current (current is one-tenth of the battery capacity) to bubble up the battery cell voltage to 2.3-2.4V until. Then use half of the initial current to continue charging until the electrolyte is violently bubbling, and the voltage should be kept stable for 3 hours. Generally, after the charger jumps on the light, continue charging for 1-2 hours, and it will take about 8-10 hours to charge. Do not overcharge, which will affect the battery life.
After the battery is used for half a year, it is recommended to deeply discharge the battery once a month, and then charge the electric vehicle battery after deep discharge. The time is controlled at about 12 hours, which will greatly benefit the recovery of the electric vehicle battery. For batteries that have been used for more than two years, if the battery is not charged according to the correct method, overcharging will easily cause the battery to lose water and heat up. In addition, if the battery is heated due to aging and short-circuit break, it indicates that the battery has been scrapped, and it is recommended to directly replace the battery with a new one.
| Material | High-tensile steel / forged aluminum |
|---|---|
| Finish | E-coat / powder paint / zinc plating |
| Standards | IATF / ISO-based process control |
| Warranty | 24 months |
| MOQ | 50-100 pcs per reference |
| Lead Time | 25-35 days after PO |
Compatible Brands:
Toyota, Honda, Nissan, BMW, Mercedes-Benz, Ford, Hyundai, Kia, Volkswagen, Land Rover, and more...
Request a Quote
Just for B2B inquiries, no retail please. We'll get back to you within 24 hours.

