Don’t know how to tie a trailer?The knotting method of the trailer rope is actually very simple

Tying a knot with a rope is basically a skill requirement of daily life. However, when the tow rope is reached, the knot must be firm, otherwise it is easy to slip off during the towing process. Today, the owner’s guide will introduce several very simple ways to tie a trailer rope, so that you can understand it at a glance.

Double tackingSimple and practical, easy to play and disassemble):

1. First put the rope around the object twice.

2. Then pass the end of the rope through the second loop and tighten it firmly.

3. Just hit one at the endHalf knotThat's it.

(Attached)Half knot:First intersect the end of the rope with the rope, and then tighten the end of the rope.

Back through the eight-character knot (Anti-dropping, even if both ends are pulled tightly, it can still be untied easily):

1. First hit one in the middle of the ropeEight-character knot, Cross the rope ends first, and then the rope end goes around the main rope, passes through the rope loop and then tightens.

2. Next, pass the end of the rope along the knot from the opposite direction to the end of the rope.

3. Then pass the rope end through the first knot (as shown in the figure below), and go back under the knot.

4. Then in the process of winding back, you need to pass the rope end through the lower rope loop.

5. Finally, adjust and tighten it.

(Attached)Eight-character knotting method:First cross the rope ends first, then the rope end goes around the main rope, and finally the rope end is passed through the rope loop and tightened and you are done.