Do not change the original car wiper?Is it necessary to go to the 4s shop to change the original wiper

Many car owners have a deep understanding that the vehicle has been used for a period of time, and then the original carWiperIt has been replaced, but the new wiper does not feel as good as the original car wiper after replacement. Is it the quality of the wiper? Do I have to go to the 4s shop to change the original wiper?

Some people think that the original car's wiper should not be replaced, but after the replacement, it will be less durable. However, it is definitely not recommended for everyone to do this, because the wiper itself is a vulnerable product, and regular replacement can ensure driving safety in rain and snow.

Is it possible to go to a 4s shop to replace the original wiper to ensure the quality? Personally think it is not necessary, because everyone can not judge that the 4s shop replaces the wiper is the original one. In fact, some 4s shops will use sub-factory parts and genuine parts instead. If you have enough hands-on ability or curiosity, you can buy large-brand wipers online to replace them, so you don't have to worry about the quality.

Why is the new wiper not as good as the original car wiper?

1. The installation is not matched in place, which will accelerate the wear of the new wiper;

2. Quality problems and adaptation problems of the new wiper;

3. The windshield has been in use for a long time, and the new wiper is not durable due to the increase of fine scratches on the surface of the glass.

When replacing the wiper, the car owner also faces the choice of whether to replace the rubber strip or the entire wiper. The advantage of replacing the entire wiper is that it is convenient and simple, but the disadvantage is that it is expensive. If you only change the rubber strips, the advantage is that the price is cheap, but the disadvantage is that the rubber strips are not universal, and the car mainly finds the right size for your vehicle.

Finally, I will teach you how to replace the rubber strip of the wiper. Note that the replacement method of different models may be slightly different. The following tutorials are for reference only:

1. Lift the wiper arm, press the tab of the wiper arm, slide the wiper assembly in the direction of the arrow, and remove the wiper assembly from the wiper arm.

2. Pull the wiper wiper in the direction of the arrow and slide it to the position where the groove of the metal bracket of the wiper can be seen.

3. Pull the head of the scraper rubber brush out of the scraper metal bracket in the direction of the arrow, and then remove the scraper rubber brush from the scraper metal bracket.

4. Insert the head of the new scraper rubber brush into the groove of the scraper metal bracket until it touches the end of the scraper gold bracket.

5. Pull the wiper wiper in the direction of the arrow, and slide the wiper wiper to the position where the groove of the metal bracket of the wiper can be seen, and then slide the head of the wiper wiper in the opposite direction.

6. The wiper wiper must be correctly installed on the metal bracket of the wiper, and then align the tongue of the wiper arm with the groove of the wiper assembly.

7. Align the protruding part of the wiper assembly with the groove of the wiper arm.

8. Slide the wiper assembly and install it to the wiper arm, and then slowly lower the wiper arm on the windshield.