Solutions to the fault that the wiper is active but does not spray water, and the wiper does not spray water

When the car owner parks the vehicle in the open air, he will often see the corpses of some insects and dust on the front windshield, which need to be used.WiperCome to clean the front windshield.When the wiper is used, the wiper brush is active, butGlass waterIt won’t come out, it won’t be able to clean the front windshield. The main reason for this situation is that the glass water of the vehicle is used up, and it may be that the weather is too cold and the freezing point of the glass water is too low, which causes the glass water to freeze. Or it may be that the water tank pipe or the wiper nozzle is blocked by scale.

Solution to the failure of the wiper not spraying water:

1. In the case of insufficient glass water, add glass water in time, find the position of the wiper water tank in the engine compartment, and just open the lid to add glass water;

2. If the glass water freezes, first add hot water with a suitable temperature or open it to a higher temperature place, and let it go after the frozen glass water melts, and replace the glass water with a higher freezing point;

3. If the scale is blocked in the water tank pipe or the wiper nozzle, just clean the blocked place;

4. If the leak is caused by the rupture of the water tank or the broken pipe, the leak must be found and replaced.

The wiper water tank of most vehicles is located on the right side of the engine compartment. There will be a sign on the water tank cover that is the same as the indicator light. You can find the location of the wiper water tank by finding this sign. Just open the lid and add glass water inside. There is a scale inside the water tank. The scale will have an upper limit and a lower limit. Just add the glass water to the middle of the upper limit and the lower limit.