Video of repairing wiper blades that are very astringent one card by one, and wiper bounce

WiperIt feels very dry and jittery when brushing, which not only affects daily use, but also the abnormal noise caused by the jitter is also very annoying. Today we will see if there is any way to repair the jitter of the wiper.

1. If the wiper blade has been used for a period of time, it is recommended that the owner replace the wiper blade to see if the jitter still exists.ifWiperIf it does not jump, it means that the problem lies in the wiper blade, because over time, the rubber wiper blade will age and become hard, and it will dry and shake when it comes in contact with the glass.

2. If the wiper bounce problem is not solved after replacing the wiper blades, then the car should be carefully observed to see if the wiper arm is parallel to the glass. Because of the uneven pressure distribution caused by the deformation of the wiper arm, abnormal contact between the wiper blade and the glass may occur. The repair can be corrected by slightly breaking it by hand, or it can be corrected by tools such as a wrench. Detailed repair can be clicked on the video to watch:

3. If the above two situations are ruled out, it is very likely that the owner did not fix the wiper blade in place when installing the wiper blade. It is recommended that the owner remove the wiper blade and install it again, and make sure that it is locked before locking.

The above is the cause of the bounce of the wiper. I remind all car owners to keep the surface of the windshield clean in daily use. If there is dust, sand or foreign matter on the surface, dry brushing is prohibited and must be turned on first.Glass waterClean and moist.