[Auto repair knowledge]How to adjust the spark plug gap of the car

How to adjustcarSpark plugGap (1) The gap measurement is checked with a special gauge or thickness gauge, but the value measured by the thickness gauge is not accurate. (2) The gap adjustment should be adjusted by turning the side electrode with a special tool, and the center electrode cannot be turned or knocked.

Note: When adjusting the gap of multi-polar spark plugs, the gap between the electrodes on each side and the center electrode should be as consistent as possible. The spark plug gap of each cylinder should be basically the same. The spark plug gap is related to the operating conditions. For example, the ca6102 gasoline engine requires that the spark plug electrode gap is 0.6-0.7mm in winter and 0.9-1.0mm in other seasons.

Related:

·Car modificationYou have to think twice before doing bad modification is to destroy the car
·car engineThrottleWhat to do if opening and closing are not flexible[汽车修理常识]
· Poor acceleration, firing backfire,exhaust pipeCauses of failure such as black smoke[汽车修理常识]
·Originally made in JapanMazdaABSdecoding[汽车修理知识]
·Causes and solutions for low engine oil pressure[汽车修理知识]
·Analysis of three typical failures of EFI engine[汽车修理知识]
·Is buying full insurance equivalent to putting my car in the safe?[汽车保险知识]