Car maintenance knowledge: introduce the maintenance knowledge of automatic transmission models

Only when the car is completely stationary, can the P gear be engaged, otherwise the gearbox will be damaged.If you want to get into and out of the P block, you must step downBrake pedal, And press the lock button on the handle at the same time.

In the event of a traffic stop signal and other short-term parking, you only need to step on the brake pedal without changing the gear lever into N gear. At this time, the engine must be in idling mode.

Just use the hand brake when parking in the parking lot.When parking on a slope, you should first tighten your hands

Brake, And then hang the shift lever into the P gear to prevent the locking mechanism from being overloaded and make the P gear easier to separate.

A car equipped with an automatic transmission cannot be towed or propelledcarMethod to start the engine, ifAccumulatorWhen the voltage drops and the engine cannot be started, a jumper cable can be used to connect the battery of another vehicle to start the engine.

For safety reasons, the engine can only be started when the gear lever is in P or N gear.

When towing a vehicle, the driving distance cannot exceed 50 kilometers, and the towing speed cannot exceed 50 kilometers per hour, otherwise the gearbox will be damaged; reverse traction is prohibited, otherwise the planetary gear mechanism inside the gearbox will be damaged.

When the automatic transmission electronic control system fails, the gearbox will drive in an emergency state. At this time, the D, 3, and 2 gears are all driven in 3 gears. The gearbox will no longer shift gears. The owner should go to the service station in time. repair