Basic knowledge of electric moped (2)

Correct use and maintenance of electric mopeds. Electric mopeds are a new type of caravan. They are similar to bicycles in use, but also very different. Below we will explain in detail how to use and maintain electric mopeds: 1. Use electric mopeds more The most ideal use method of the advantages of the function is to assist the car, the electricity assists the pedestrian, and the human power is linked, which saves both labor and electricity. 2. For electric mopeds with zero-start function, due to the large current when starting at rest, more energy consumption, and easy damage to the battery, you should first use the pedals to ride at a certain speed (Tempo) and then use electric power to accelerate. Never accelerate in place. When driving uphill, carrying a heavy load, heading into the wind, or driving against the wind, the bicycle should be assisted by human riding. This can avoid the battery's super-high current discharge, increase the mileage on a single charge, and help prolong the battery life. 3. To charge the battery, use the special charger provided with the car. Insert the input plug into the battery box, first insert the battery box and then the AC power, and do not displace it. It takes 3-8 hours to fully charge. Charging in winter can appropriately extend the charging time. 4. The acceleration handle of the electric moped can sometimes not completely abdicate. Please develop a good habit of pushing the handle back to its original position after the acceleration is completed. 5.brakeWhen, the current of the motor is cut off immediately. But when the brake is released, if the accelerator handle is still in the accelerating position at this time, the motor will immediately get current to move forward (Forward), which is not conducive to safety. Please make sure to develop a good habit of pushing the handle back to its original position after the acceleration is completed. . 6. Before each use of the electric moped, check: (1)tireIs the air pressure sufficient? If the air pressure is sufficient, it can be loweredtireFriction resistance with the road (Strada). (2) Whether the steering of the handlebar is reliable and whether the brake is flexible and effective, it is necessary to ensure driving safety. (3) Whether the socket of the battery box and the charger plug are loose, whether the battery box is locked, whether the horn and light button are effective, ensure that the circuit is unblocked. 7. Electric bicycles are not suitable for driving on uneven or steep roads. If you encounter such roads, please drive slowly or get off the car. 8. When riding in winter, please use pedals as much as possible to help you not only exercise your body, but also help prolong the service life of the battery. (Because the low temperature reduces the capacity of the battery pack, if the depth of discharge increases, the continued mileage will be shortened). 9. Although the electric moped has good rainproof performance, please avoid direct sunlight or rain to prevent corrosion of the car body or rotating parts. It should not be higher than the water level when it is used in the rainy season or when it passes through water pools, stagnant water, and water.Wheel hubThe shaft center line prevents damage to the motor caused by water ingress. 10. The standard load of an electric bicycle is 80 kg, so you should avoid carrying heavy objects when removing the weight of the rider. When carrying a heavy load, use the pedal to assist. 11. The seat of the electric bicycle is subject to the fact that the rider's feet can touch the ground to ensure safety. 12. To users of electric mopeds, please read the instructions on the electric mopeds carefully before using the electric mopeds.