Six precautions for installing HID xenon headlights[汽车修理知识]

1. It is not conducive to installing in the overheated place in the car. (BecauseStabilizerThe best working environment for the internal electronic components is between -20°C and 75°C, while the working temperature of the car's engine room is usually above 90°C) 2. Do not install near the water source; such asWater tanknearby. (Excessive humidity will cause leakage and aging of the ballast) 3. Place it in a place with good air permeability so that air can flow to lower the temperature of the ballast. 4. The distance between the ballast and the light bulb is not easy to be too far, so as to reduce the light bulb phenomenon caused by the line partial pressure. 5. The ballastHigh-voltage linePart is not easy to wind, so as not to generate excessive magnetic field, and affectcarOther electrical equipment. 6. Change the headlight of the original car to 10AfuseChange to 15-20A, in order to avoid excessive current when starting, blow the original car's fuse. Automobile related knowledge ·Save money by keeping a cartireWork hard[汽车维修知识]
·How to apply what you have learned to avoid being cheated when repairing a car[汽车维修知识]
·New tires should be installed on the rear wheels[汽车修理常识]
·Analysis and answers to common problems of new car maintenance[汽车修理常识]
·Good effect, environmental protection and healthy drivingswitchAir conditioning has a coup[汽车修理常识]
·Conservation experts say the waste of car maintenance[汽车修理知识]
·How to make the car more "freeze-resistant" when the severe cold season is coming?[汽车修理知识]
· Insiders: What are the key points for new car maintenance for the first time?[汽车修理知识]
·Attention to driving in rainy season: calmly deal with flexible handling when wading[汽车维修常识]