How to reduce the wear of the clutch during use[汽车维修知识]

clutchThe wear and tear is an old topic, but how to reduce wear and tear in use is everyone's attention. Let's discuss it today.
If you want to reduce the wear of the clutch, you must first understandClutch slave cylinderThe structure is nested intransmissionOn the input shaft sleeve, the clutch pressure plate provides the return force to the sub-cylinder through the release bearing, so the release bearing is always in contact with the pressure plate at ordinary times.When stepped onClutch pedalAfter that, the clutch pressure plate and the pressure plate are separated by the release bearing.The driver depresses the clutch pedal, the engine transmission is disconnected from the transmission, and the engine power is not transmitted to the wheels for drivingcar. When the driver releases the clutch, the transmission of the engine will be connected to the transmission, so that the power is transmitted to the wheels.
Note that the following methods can effectively reduce the wear of the clutch. Start in 1st gear to obtain the maximum torque at start and reduce clutch overload. To reduce the clutch in a semi-linked state, the clutch pedal should be depressed to the end during use and completely released after use to ensure the clutch is completely separated and reliably combined. After a successful start, the clutch should be released as soon as possible to reduce unnecessary friction between the clutch pressure plate and the pressure plate. Do not put your foot on the clutch pedal during normal driving to ensure that the clutch is fully engaged. In addition, when driving in a city, do not depress the clutch pedal prematurely when you need to decelerate. You should wait for the vehicle speed to fall within a reasonable range before depressing the clutch pedal to reduce the clutch idling. When parking, you should pick the neutral gear and release the clutch pedal, so as to avoid increasing the burden on the clutch.
Zhuozhong Automotive Network

Related:

·A list of the basic expenses of "raising" a car in 2008[汽车维修知识]
·rainy seasoncar maintenance-Open the car "protective umbrella" for your car[汽车维修知识]
·How to solve the problem of sudden "destruction of the car" while on the move[汽车维修知识]
·Car modificationYou have to think twice before doing bad modification is to destroy the car
·car engineThrottleWhat to do if opening and closing are not flexible[汽车修理常识]
· Poor acceleration, firing backfire,exhaust pipeCauses of failure such as black smoke[汽车修理常识]